Media Library / Images

Graphic Drip Stop spout for ZVA Slimline 2 nozzles

Slimline 21 blue

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360 and EN 13483.

Rubber Expansion Joint ERV-G 80.16

YELLOW BAND expansion joints suitable for petroleum based products with aromatic content up to 50%, fuels (ethanol content up to 85 %), aviation fuels, town gas and natural gas except liquefied petroleum gas. Temperature range (depending on medium) - 20° C up to + 90° C, temporarily up to + 100° C. Electrically dissipative.

HD-C aircraft refuelling hose

TW 75 E

Aircraft refuelling Hose Reel

rewind

CHD 32

Lilac Band chemical hose without helix, DN 32

FGN 2 St

Flange with male thread, steel zinc plated/chromated

Slimline 19 black

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360.

ContiTech Production hose

secondary braid

ContiTech Production ERV

manufacturing the blank

ERV-G, DN 250 and DN 300

Yellow Band

GasGuard LPG nozzle GG30: optional Magnet in the guard

For contactless activation of dispensers with reed switch technology

Elaflex Hamburg

Aerial view over the Elaflex premises

H2 Hydrogen

ERV-H2+ DN 100

FWS composite hoses / hose assemblies

Type FWS PTFE with male threaded fitting, Type FWS PP with Camlock coupling, Type FWS VR with "TW" female coupler MK

SPANNFIX pinned safety clamps of aluminium

SX 50 Al

ContiTech Production hose

coiling

Elaflex Hamburg

Assembling VSRV bolted vacuum support ring

Fluorline EFL 21

Universal pump hose DN 21 for chemicals, petroleum based products, for propane, butane and other L.P. gases, as well as solvents. Ideal for highly sensitive media such as AdBlue® urea solution. Temperature range - 40° to + 100° C. Burst pressure > 64 bar.

ERV-R 100.16

RED BAND Rubber Expansion Joint for water, drinking water (DVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature range - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

Drum filling

with CHS chemical hose assembly

M 16-1" NR cr

Female ferrule hose coupling EN 14424, factory assembled, non-reattacheable. Slimline 16 hose, red.

Filling of Heating Oil Tanks: Adapter KR 50-2 3/4" (Switzerland)

for difficult to reach filler inlets

ContiTech Production hose

vulcanisation / autoclave

M 16-1" NR cr

Female ferrule hose coupling EN 14424, factory assembled, non-reattacheable. Slimline 16 hose, yellow.

Ship bunkering with LNG

Coupling of DCC male and female part DN 50; left hand side CBC 50 Cryogenic Breakaway Coupling

Elaflex Hamburg

Hose assemblies, marking after testing

GasGuard GG11R

The GasGuard GG11 Back-Check Valve (GG11R: with additional release screw) should be standard equipment for any LPGas road tanker operator. It is used in conjunction with LPGas bulk refueling nozzles to contain leaks at storage tank fill points. If the fill point proves to be leaking when removing the nozzle it can be left on the tank until corrective action is taken. The driver can move to the next fill point without delay.

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

Aircraft refuelling: MannTek sampling unit in hydrant system