Media Library / Images

ZVF 50 helicopter refuelling with HD-C hose assembly

France

ERV-CR 100 (4")

'CR' Rubber Expansion Joint for cold and warm water / ship engine room

ZVA Slimline 2 DSA

DSA: Pressure Controlled Safety Shut-Off

DDC-M 50-2" SS

MannTek Dry Disconnect Coupling, DN 50, stainless steel

HD-C LT, Low Temperature

LT (Low Temperature) types of our aircraft refuelling hoses are suitable for use in especially cold regions - high flexibility.

Filling of Heating Oil Tanks: Adapter KR 50-2 3/4" (Switzerland)

for difficult to reach filler inlets

IBC unloading

Female hose coupling MC 38-S60 SS (with Spannfix clamps). Direct connection of a hose assembly to the IBC.

PAL hoses for the chemical industry

Functioning principle of MannTek DDC Dry Disconnect Couplings

closed - open

Flange seal FD 220-162 of ELAPAC

Oasis BV708, 1" ball valves, isolation valves, CNG spheres (tanks)

SMS 19-3/4"

Steam hose couplings of steel to EN 14423. With bolted clamps of hot stamped brass. For saturated steam hoses up to 220° C, compressed air, oxygen, oils up to 25 bar W.P. Hose tail and union nut of steel Zn / Cr.

Universal hose UTS 50

SG 1" 1x0 Al Propeller

Sight Glass with propelller, to EN 13617-1, DN 25, for installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised gasoline and diesel fuels according EN 589 + EN 590, including ethanol or biodiesel content, also Avgas and Jet-A1.

ELAFLEX Hamburg

Delivery trucks, loading ramps

Vehicle refuelling with LPG (L.P. Gas, Autogas)

ZVG 2 EURO

ELAFLEX Hamburg

CAD construction

TW coupling wrenches of brass or steel

EW K 50 Ms, EW K 80 Ms, EW K 100 Ms, EW K 50 St, EW K 80 St, EW TWS 50, EW TWS 80

VB 50 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

ELAPAC FD flat sealing material

2 or 3 mm thickness, available as coil, standard size seal or in custom shape. An elastic flange seal for tank truck and tank plant construction etc., where rough sealing surfaces require a high adaptability, where flange seals should still have good flexibility to avoid pipe fractures or simple sealing materials because little or no force can be used to tighten the joint.

ZVA Slimline 2 LA nozzle with LeverAssist hold-open aid

and Slimline dispensing hose, yellow

LPG Autogas Adapter (filler inlet) ACME

ACME thread 1 3/4"

Rail tanker unloading of petroleum based products

LTW hose assemblies, TW couplings

Motorcycle refuelling at the petrol station

ZVA Slimline 2 GR with special short spout

ZVA-RG

Automatic nozzle ZVA DN 19, of red bronze (gunmetal), for solvents and corrosive media. Flowrate up to 60 l / min.

ERV-GS

"Yellow Steel" Rubber Expansion Joints / ship engine room

SPANNFIX pinned safety clamps of stainless steel

SX 75 NR SS

Terminal Railtanker

LTW 100, MK 100, VK 100, SBC 100-4, FFBV 100

Lube oil filling, ZV 19 manual nozzle

DN 1" Ms

Double nipple brass