Media Library / Images

ZVA Slimline 2, Sight Glass SG 1" Al, hose assembly

L.P. Gas rail tanker

loading and unloading with DGC Dry Gas Couplings; Use of adapters with ACME thread

ZVG 2 K (Korea)

suitable for passenger and heavy duty vehicle refuelling in markets utilising the 'J15' fill point receptacle.

Rubber Expansion Joint ERV-R 80.16

RED BAND expansion joints for water, drinking water (approvalDVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature (depending on medium) - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

Loading Brine (salt solutíon for winter service): CHS hose asssembly, DDC Dry Disconnect Coupling

Slimline dispensing hose SF (sulfur-free)

Fuel producers spend considerable effort in fulfilling the maximum allowed sulfur content. Rubber compounds of this hose type are free of sulphur – ensures that the sulphur content of the fuel is not increased, even if the medium remains for a long time within the hose

Underwing refuelling, HD-C

Aircraft dispenser, pit

Oasis BV708, 1" ball valves, isolation valves, CNG spheres (tanks)

Manufacturing warm forged parts

Example SC 150 Spannloc clamp

HD-C aircraft refuelling hose

VHD 63 C NEON

Fluorline EFL 16

Universal pump hose DN 16 for chemicals, petroleum based products, for propane, butane and other L.P. gases, as well as solvents. Ideal for highly sensitive media such as AdBlue^® urea solution. Temperature range -40 °C to +100 °C. Burst pressure > 64 bar.

Construction of ELAFLEX composite hoses type FWS

Sectioned view of a composite hose, denomination of the components – detail view

ELAFLEX Hamburg

Incoming goods / flanges

ZVG 2 ACME nozzle for L.P. Gas / Autogas

LPG nozzle for vehicle refuelling with liquefied petroleum gas (propane, butane and mixtures) up to 50 l / min. Working pressure 25 bar. Test pressure 40 bar. Burst pressure > 100 bar. Temperature range - 25° up to + 70° C, 'LT'-Type down to - 40° C.

Hose assembly for L.P. Gas

LPG 50, DGC-M 50 with special handle, adapter DGC 50 x 3 1/4" ACME

HD 100 C, HD 10 sensing hose

Aircraft Dispenser with DN 100 hose (spiralised marking) and a sensor hose to control the hydrant system.

Slimline 16 green

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360.

FWS composite hose / hose assembly

Type FWS PTFE with male threaded fitting VPH-SS

MannTek Dry Disconnect Couplings:

DDC-M 80-3" SS with PolypalClean hose assembly, DDC-V 80-3" SS with pipe end

ERV-R 100.16

RED BAND Rubber Expansion Joint for water, drinking water (DVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature range - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

Truck refuelling with LPG (L.P. Gas, Autogas)

ZVG 2 ACME nozzle, LPG 16 hose

AdBlue® urea solution, road tanker:

DDC-M 50 Dry Disconnect Coupling, UTL 50 hose assembly on reel

Vehicle refuelling with LPG (L.P. Gas, Autogas)

GasGuard GG30 BAYO nozzle with Bayonet connector and optional splashguard

HD 100 C, hydrant hose

Aircraft dispenser, pit

ZVA Slimline 2 GR

blue scuffguard, blue produc sleeve, guard no. 4

ZVA Slimline 2 nozzle, yellow

Section view ERV-G Rubber Expansion Joint

GW-G, FGN 4" SS, RS 4" x 3" SS, MK 80 SS

f. fire brigade dangerous goods equipment trucks

DDC Dry Disconnect Couplings for chemicals

Rail tanker loading/unloading

ZVF 25 for aircraft refuelling

dust cap and ground cable assembly