Media Library / Images

DDC-M 80 SS; SG 3", VC 75-3, Elaflon FEP 75, DDC-K 3" SS ADR

Epoxy resin loading with Dry Disconnect Coupling, sight glass and FEP universal hose. DDC cap with pressure relief at container tank outlet.

ZVA Slimline 2 with reduced spout and Slimline hose

here: for gasoline, use in countries without vapour recovery regulation

Marine bunkering and cargo hoses

ship to shore cargo transfer

Fluorflex FXD universal hose assemblies

with inner corrugation for maximal flexibility. Picture 1

SBC-C 150.16

MannTek Safety Breakaway Coupling with cable release, PN 16 flange connection

Rubber Expansion Joint ERV-CR 80.16

CR Expansion Joints for cold and warm water, swimming pool water, sea water, waste water (weakly sour or alkaline) also oil containing, cooling water with protective oils against corrosion, lubricating oil, grease and air, compressed air. Temperature range (depending on medium) - 25° C up to + 90° C, temporarily up to + 100° C. Electrically non-conductive.

HB 19 ST tar spraying hose

Pressure hose for road construction machines, especially for hot bitumen and heavy heating oil. Temperature range: - 25° C up to + 220° C. Meets EN 13482, Type 2 SB/B (DN 19 and DN 32 analogue).

MB 80 SSE

TW dust cap of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

HD 32 C

Yellow Band' aircraft refuelling hose, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range - 30° up to + 90° Celsius. Electrical resistance between 1,000 and 1 million Ohm.

NB-ZVF 50 SR, ER 583 PTL

Nozzle boot f. ZVF 50 with additional spout retainer

ERV with FSH:

Flame protection cover (open)

Oasis HC308 Ultra Fast Quick Fill Coupler, SAE male, for CNG

Accessories and spare parts: Ground cable assembly, dust cap assemblies, spouts, strainer

ER 339, ER 494, ER 495, ER 587 JET PTL, EKG 1200, GKG 19, GKG 32, GKG 38-J, ES336.1

Section view of a CSB 21 COAX Safety Break

ZVA Slimline 2, guard no. 4, Sight Glass SG 1 Al, Slimline hose assembly

MannTek DGC DryGasCoupling for L.P. Gas

DGC-V 80 F, DDC-K 3" NBR

MC 38-11/2" SS

Female hose coupling for hoses, stainless steel, with Spannloc clamps

Oasis FV103 Fill Valve, CNG dispenser

Locomotive refuelling

Dispenser, ZV 32 DB nozzles with Renk coupling

SG 1½" Al

Ssight glass for ZVA 32 nozzles, e.g. for aviation refuelling.

Fluorflex FXD universal hose assembly

extremely flexible PTFE hose with maximum bending radius

GasGuard LPG nozzle GG20

With long connector nut to access 'hard to reach' fill points. Economic type for industrial refueling / attended refueling. Release volume on valve closure: 1,9 cm³.

Truck refuelling with LPG (L.P. Gas, Autogas)

ZVG 2 ACME nozzle, LPG 16 hose

Nozzle boot NB-ZVF 50

for ZVF 50 Oberflügel-Zapfventile

Oasis FV103 180° Fill Valve with Bus & Truck Nozzle, for CNG

Bonding reel grey, high visibility bonding cable with clamp

Hot stamping process, production TW coupling parts

DAC-V 65

Aircraft refueller , Dry Aircraft Coupling to ISO 45 for bottom loading

Transport protection for flanged fittings

Aircraft refuelling

Carter Underwing Nozzle, HD63C Neon, ZVF 50 JET, SC 50 Al, HD 50 C, Hose Bead BD 50