Media Library / Images

DDC-M 50-2" SS

MannTek Dry Disconnect Coupling, DN 50, stainless steel

Unloading petroleum products at the service station (road tanker to UST)

LG 3" hose assembly for gravity discharge, LTW 50 hose assembly for vapour balance

Rubber Expansion Joint ERV-G LT 80.16

YELLOW BAND LT expansion joints designed for low temperature applications for standard-conform petroleum based products, e.g. diesel, heating oil up to + 90° C, aviation fuels, petroleum up to + 60° C and gasoline up to + 40° C. Temperature (depending on medium) range - 40° C up to + 90° C, temporarily up to + 100° C. Electrically dissipative.

Spannloc hose clamps of stainless steel for chemical hoses

Cabinet of road tanker:

MK 80 with VB 80 ADR SS (plug with pressure relief)

LH2 Refuelling

'N-LH2' nozzle for LH2 truck refuelling of cryogenic hydrogen

Aircraft refuelling

Carter Underwing Nozzle, HD63C Neon, ZVF 50 JET, SC 50 Al, HD 50 C, Hose Bead BD 50

ELAFLEX Hamburg

Aerial view (left to right): Technical dept., small aisle stock, stock with loading ramps

ZVF 50 JET

Manual aviation fuelling nozzle for overwing service. Flowrate up to 400 ltr. / min. (85 IGM – higher flowrates are possible). Size DN 50. Working pressure 10 bar (140 psi). Temperature range -40° C up to +55° C

AMX 50 PA

Ammoniac hose to EN ISO 5771 for water-free, liquid and gaseous ammonia.

ContiTech Production hose

extrusion

ZVF 25 for aircraft refuelling

dust cap and ground cable assembly

DG 50 Al - new Aluminium swivel for ZVF 50

Section view

M 21-1" NR cr

Female ferrule hose coupling EN 14424, factory assembled, non-reattacheable. Slimline 21 hose, blue.

Road tanker with hose reel spring rewind blue, ZVA Slimline 2 green

Mobile refuelling

ZVA Slimline 2 GR, Coax hose assembly

Automatic nozzle with vapour recovery, flowrate up to 45 l / min.

Filling plant for special gasoline types

ZVA 25 solvent type with special seals, Slimline hose assemblies

ZVA Slimline 2 GRVP, Coax hose assembly

With integrated vapour insert EK 096. For dispensers with single fi lling point or dispensers with integrated 'On / Off ' valve. The vapour return rate is regulated within the dispenser.

Bunker boat: FHD flat laying hoses, HD hoses

ContiTech Production hose

Dispensing hose, extrusion cover

SVX 50-2"

Male hose coupling of steel with Spannfix clamps

BD 63, HD 63 C

Aircraft refuelling hoses with ELAFLEX Hose Beads 'BD'. Details see Information 7.17

Slimline dispensing hose SF (sulfur-free)

Fuel producers spend considerable effort in fulfilling the maximum allowed sulfur content. Rubber compounds of this hose type are free of sulphur – ensures that the sulphur content of the fuel is not increased, even if the medium remains for a long time within the hose

DN 2" Ms

Double nipple brass

DCC Dry Cryogenic Coupling for LNG

with cap

ZVA Slimline 2 / ZVA Slimline 2 GR

SMC 50-2"

Female hose coupling of steel with Spannloc clamps

Underwing aircraft refuelling

TW 100, SFC 100 TW, HD 63 C Neon

Road tanker hose assembly

with VKC 75 SS (TW male coupling stainless steel, one part, with Spannloc clamps, K-Ring), dust cap VB 80 SS & chain

HD 100 C, HD 10 sensing hose

Aircraft Dispenser with DN 100 hose (spiralised marking) and a sensor hose to control the hydrant system.