Fotos

Elaflex Cam and Groove Couplings ('Camlock'): AMKX 50 EASY

EASYLOC stainless steel coupler to EN 14420 - 7, with lever arrest. Picture shows the version as one-piece coupler with integrated hose tail and Spannfix stainless steel clamp

NB-ZVF 50

Noozle Boots for ZVF 50 Overwing Nozzles

ZVA Slimline 2 GRVP, Coax hose assembly

With integrated vapour insert EK 096. For dispensers with single fi lling point or dispensers with integrated 'On / Off ' valve. The vapour return rate is regulated within the dispenser.

ZVF 50 AVGAS for aircraft refuelling

with ER 583

ZVA Slimline 2 and ZVA Slimline 2 GR

Dispenser, Czech Republic

ELAFLEX Hamburg

ERV marking after test

Oasis Fill Valves at CNG service station

Camlock Cam Locking hose tail AMK-St 50 Ms (brass)

for the assembling with Spannfix or Spannloc clamps

Unloading petroleum products at the service station (road tanker to UST)

LTW hose assembly, MK 80-32° Ms couplers with bent lever. The lever shall always be fully closed for safety reasons. For applications with limited room.

ZVA_AdBlue_LV_2-Stufen-Anschlag_Step1

Use - 1/2

Rubber Expansion Joint ERV-R 80.16

RED BAND expansion joints for water, drinking water (approvalDVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature (depending on medium) - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

ZVF 50 SIC (Screw In Connection), strainier inspection

ERV-G 100 TW

Rail tanker unloading of petroleum based products

LTW hose assemblies, TW couplings

DCC Dry Cryogenic Coupling for LNG

Coupling process

FF-St 80 SSE

Fixed flange hose tail for assembling with Spannfix or Spannloc. Material: stainless steel with universally resistant PFA coating (red)

DDC-V 50 SS F, DDC-K 50 blue (f. AdBlue)

Slimline 21 black

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360 and EN 13483.