Media Library / Images

Hose assembly TW 75 with MKX 75.80 Ms

TW hose with TW female coupler, two piece

Stainless steel couplings with PFA coating, type "...SSE"

Surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

FWS 50 PTFE

Composite hose with PTFE lining

Elaflex product configurators

for quick and easy product choice / RFQ

HD 38 C NEON, Aljac bonding reel

Airfield refueller (e-refuelling technology)

AMK 25 EASY

EASYLOC ('Camlock' stainless steel coupler to EN 14420 – 7 for male adapters AVK with captive seal) with lever arrest

Slimline SF 19 black

Quality petrol pump hose for gasoline and diesel fuels. Special type 'sulphur-free'. Sulphur content of fuel does not increase, even if medium remains with the hose for a longer time, see Information 12. 15 and catalogue page 111c.

ZVA Slimline 2, dispenser

LBS 50 foodstuff hose, RMC 50 SS foodstuff fitting with Spannloc of stainless steel

Aseptic bulk filling

Oasis DMI Dispenser Manifold for CNG

ZVA 25

Special type for solvents / chemicals

AKD 19 Hy

CouplingSeal CSM

Oasis BV708, 1" ball valves, isolation valves, CNG spheres (tanks)

ELAFLEX HIBY Tanktechnik, Production Plettenberg / Germany

Assembling ZVA components

Drum unloading; UTS 32 hose assembly

IBC unloading

Female hose coupling MC 38-S60 SS (with Spannfix clamps) and LMS solvent hose. Direct connection of a hose assembly to the IBC.

Rubber Expansion Joint ERV-R 80.16

RED BAND expansion joints for water, drinking water (approvalDVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature (depending on medium) - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

ZVF 50 JET

Manual aviation fuelling nozzle for overwing service. Flowrate up to 400 ltr. / min. (85 IGM – higher flowrates are possible). Size DN 50. Working pressure 10 bar (140 psi). Temperature range -40° C up to +55° C

Oasis DMI Dispenser Manifold for CNG

EK 145 Product Badges for ZVA nozzles

Malaysia

Grafik ARK 19

Safety Break for LPG (Autogas) dispensers. Hose Break. Reassembly after separation without tools.

Slimline 21 red

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360 and EN 13483.

Manufacturing of turned parts

ZVA Slimline 2 nozzles special version, Slimline dispensing hoses blue / red

Thailand

SPANNFIX pinned Sicherheits Klemmbacken aus aluminium

SX 75 NR Al

Underwing refuelling A 380

Production MannTek, Sweden

Universal hose assembly UTS 50 with VC 50 SS / SS

LNG Refuelling

LNG Nozzle 'N-LNG' coupled to fuel, LNG 25 fill hose assembly

Oasis EC100 electrically isolating couplers for CNG