Media Library / Images

Unloading LNG road tanker

DCC Dry Cryogenic Coupling

Type PCS 38 (Polypal Clean DN 38 mm)

Camlock Cam Locking hose tail AMK-St 50 Ms and male adapter AVK 50-2" Ms (brass)

ZVA Slimline 2 LA nozzle with LeverAssist hold-open aid

LeverAssist reduces the hold-open force by 90%, for comfortable refuelling in countries where latching is not allowed

SG 3" Rg

Sight Glass with 3" female/male BSP thread, gunmetal

SPANNFIX pinned safety clamps of aluminium

SX 50 NR Al

Premium refuelling equipment from ELAFLEX

RMC 25 SS

Hose coupling with female foodstuff thread and Spannloc clamps

GasGuard LPG nozzle GG20DN

With long connector nut to access 'hard to reach' fill points. "DN": suited for use by the general public and untrained personell (self service). Patented dual nose piece for added safety. Low lever actuation force. Gas release volume on valve closure : 1,7 cm³.

Cargo loading of a tanker with petroleum based products; FHD hose assembly with new longitudinal stripe to avoid torsion

Picture courtesy of Macoil International, Gibraltar

V 16-1" cr

Male ferrule hose coupling EN 14424, reusable. Slimline 16 hose, red.

L.P. Gas rail tanker

loading and unloading with DGC Dry Gas Couplings; Use of adapters with ACME thread

ELAFLEX refuelling equipment for CNG and LNG

ERV ZSS:

Tied Flanges – Tie rods with inner and outer limitation

ContiTech Production hose

Intermediate layer

DCC Dry Cryogenic Coupling for LNG

Coupling process

M 21-1" cr

Female ferrule hose coupling EN 14424, reuasable. Slimline 21 hose, red.

Elaflon PTFE 50

Universal hose with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals. Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° up to + 150° Celsius (depending on medium). Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min. Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

Yellow band aircraft refuelling hose, hose coupling with male thread, Spannloc aus Aluminium

HD 50 C, VC 50 SS, SC 50 Al

ZVA 25

HIFLO-Automatic nozzle DN 25 (1"), flowrate up to 140 litres/min.

coupled PTFE hose assemblies, MK 50 SS, Adapter VK 50 SS x VK 50 SS, Spannloc stainless steel clamps

TWD-W coupling seal

NBR white

Aircraft refuelling: MannTek sampling unit in hydrant system

ZVA Slimline 2, guard no. 4, Sight Glass SG 1 Al, Slimline hose assembly

VB 80 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

Simultaneous Refuelling/Filling of Diesel and AdBlue®

Picture 1

Stainless steel couplings with PFA coating, type "...SSE"

Surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

Universal hose UTL 50

ELAFLEX Hamburg

Aerial view over the ELAFLEX premises

Elaflon Plus FEP hose assembly, crimped foodstuff fitting