Media Library / Images

Tar (bitumen) spraying hose HB-ST in action

Elapharm EPH 25 with foodstuff fitting DIN 11551, free of dead spaces

Manifold for filling chemical tanktrucks

UTS hose assemblies

Safety Crimping Ferrule of stainless steel

SH 50 SS

Fluorflex FXD 50

PTFE / EPDM Universal helical hose - high performance chemical hose to DIN 26054, combining the universal chemical resistance of PTFE with exceptional flexibility and tight bending radius.

Oasis SV104 Sandwich Valve with Air Torque Actuator, for CNG

MannTek DGC DryGasCouplings for L.P. Gas

DGC-M 50 F, DGC-M 80-3", DGC-M 50-2", LPG hose

Rubber Expansion Joint ERV-G LT 80.16

YELLOW BAND LT expansion joints designed for low temperature applications for standard-conform petroleum based products, e.g. diesel, heating oil up to + 90° C, aviation fuels, petroleum up to + 60° C and gasoline up to + 40° C. Temperature (depending on medium) range - 40° C up to + 90° C, temporarily up to + 100° C. Electrically dissipative.

Connection DDC-M 100 with HD hose assembly to tanker

Ship bunkering from the road tanker

UTD hose assemblies in Ex-zone

ELAFLEX Hamburg

Assembling bunker hose

Elaflon PTFE 50

Universal hose with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals. Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° up to + 150° Celsius (depending on medium). Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min. Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

Polypal Clean hose assembly

Pharmaceutical production

Elapharm EPH 38 OHM-G with CF hose tail DIN 32676, free of dead spaces

ERV-G 150 TW, ERV-G 100 TW, ERV-G 80 TW

Ship loading various media - STW 150 and UTS 150 hose assemblies

Oasis FV103 with NC203 P30, Light Duty Fill Valve and Transit Nozzle for CNG

Road tanker Sweden

large reel with HD hose assembly, DDC-V (Dry Disconnect Coupling, tank unit) and DDC-K (caps)

Polypal Plus 50 universal hose

with SFC 50 SS / SS hose flange (hose tail, swiveling flange and Spannloc clamps of stainless steel)

AMKC 50 SS

'Camlock' stainless steel steel coupler to EN 14420 - 7 with hose tail and Spannloc clamps

ZVA Slimline 2 GRVP - spout with vapour suction inlet

Terminal / gantry: TW hose assemblies for bottom loading of road tankers

ELAFLEX Hamburg, stock

Ship bunkering loading and unloading, Hose Reels, HD hose, ZV 500

Bunkerboat

Unloading chemical road tanker

UTS hose assembly

PHD 100, airport depot

Rubber Expansion Joint ERV-GR 80.16

GREEN BAND expansion joints for chemicals, acids, alkalis and aggressive chemical waste water. For oil-contaminated compressed air up to + 90° C. Temperature range (depending on medium) - 20° C up to + 100° C, temporarily up to + 110° C. Electrically non-conductive.

KSS-SD of stainless steel

for saturated steam hoses. These hose assemblies are subject to high wear. The main stress area for hose assemblies is also at the joint end is protected.

L.P.Gas petrolstation, GG20, Slimline, ZVG 2 EURO UL

Truck refuelling

GasGuard LPG / Autogas refuelling equipment

Nozzles, nozzle boot for dispenser installation, LPG 16 hose assemblies, Safety Break ARK 19