Media Library / Images

ELAPHARM and SD Pyropal steam hose

Pharmaceutical production

ZVA LV for AdBlue® with EA 075 LV

Urea solution (DEF, ARLA 32) for Light Vehicles

Type PCS 50 (Polypal Clean DN 50 mm)

LPG 16 orange

Hose assembly for L.P. Gas, with anti-kinking sleeve and Colour Sleeve

Elaflon PTFE 50

Universal hose with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals. Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° up to + 150° Celsius (depending on medium). Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min. Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

Elaflon PTFE 50 with FFX 50 SSE/SS; PCS 25 with AMKC 25 SSE/SS

Universal hoses with PFA coated fixed flange and Camlock fittings. Spannfix / Spannloc stainless steel clamps.

SG-COAX

Sight Glass for ZVA Slimline 2 GR

ELAFLEX Hamburg

Cutting area for dispensing hose

UTL 50 universal chemical hose assembly with KSS anti-kinking-spiral

and DDC Dry Disconnect Coupling

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

ERV-BR 100.16

BR Rubber Expansion Joint, special type for abrasive media such as sludges, slurries, solid / liquid mixtures and emulsions, dustlike or powdery products. Also suitable for all kinds of water (non oil containing) as well as various chemicals. Not suitable for petroleum based products. For extreme strain (e. g. sharp and rough-edged matter) we suggest the use of ERV with inner protection sleeve type SR.

Section view ERV-R Rubber Expansion Joint

SBC-C 150.16

MannTek Safety Breakaway Coupling with cable release, PN 16 flange connection

SG 1 1x0 SS for Nozzles for AdBlue®

Attach on dispenser side of swivel

ELAFLEX HIBY Tanktechnik, Production Plettenberg / Germany

Plettenberg factory 1

MannTek DGC-M & DGC-V DryGasCouplings

the alternative to ACME and flanged connections

ELAPHARM Type EPH-OHM G

electrically conductive 'OHM/T', with light grey cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, black PTFE liner.

H2 Cover Hose 'CH-H2 38'

Nozzle Thread

HB 19 ST tar spraying hose

Pressure hose for road construction machines, especially for hot bitumen and heavy heating oil. Temperature range: - 25° C up to + 220° C. Meets EN 13482, Type 2 SB/B (DN 19 and DN 32 analogue).

ELAFLEX Hamburg

Coax hose assembling, colours

CBC-C

Cryogenic Breakaway Coupling for LNG with cable release: after release

ELAFLEX HIBY Tanktechnik, Production Plettenberg / Germany

Assembling hall, meterial logistics

H2 Hydrogen

H2 25 D Hydrogen hose, SFC 25, MX 25, VC 25

ERV-R 200x175.16 ZS 4

Red Band Rubber Expansion Joint, special length 175 mm, with "ZS" limiter (tie rods with outer limitation in rubber bushings)

ERV-G

Pump-tank connection; lateral offset

ContiTech Production ERV

Calender, woven fabric

ZVA-GBZ

Automatic nozzle ZVA DN 19, of cast bronze (GBZ), for drinking alcohol, brandy etc. Flowrate up to 60 l / min.

ZVA Slimline 2 GR

Automatic nozzle with vapour recovery, flowrate up to 45 l / min.

DAC, Airport Depot

Dry Aircraft Coupling ISO 45 with HD-C hoses for bottom loading of aircraft refuellers at airport depot

Rail tanker unloading of petroleum based products

FWS PP St/St composite hose, MannTek Dry Disconnect Couplings