Media Library / Images

ZVA Slimline 2 GR

with red scuffguard; CSB 21 Coax Safety Break with BS 21 Break Sleeve; Slimline COAX hose assembly

MB 80 SSE

TW dust cap of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

Coax hose assembly, section view

Elaflon Plus FEP 25

Universal hose ELAFLON PLUS FEP with seamless FEP lining, resistant to all commonly used chemicals, see resistance chart. Suitable for both suction and delivery (Type FEP D = delivery only). W.P. up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° C up to + 100° C, briefly up to 130° C. Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min (open system). Meets EN 12115.

ZVA_AdBlue_LV_2-Stufen-Anschlag_Step1

Use - 1/2

Elaflex hose assemblies and Rubber Expansion Joints

Boat refuelling, ZVA 25

Latvia

SMX 50-2"

Female hose coupling of steel with Spannfix clamps

Overwing refuelling ZVA 25

MK 80 SS, TW couplers stainless steel

VB 80 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

ERV SR:

ERV with inner protection sleeve of stainless steel AISI 316 Ti to prevent abrasion of the rubber liner, i. e. for media containing abrasive components or to avoid cavitation. Please note : The nominal bore is reduced.

LBS 75 hose assembly for foodstuffs, FDA conform

with VC 50 SS male coupling, Spannloc clamps

Dantec Production hose

Composite hoses: hose with customer braning, application of outer helix

ZVF 50 helicopter refuelling with HD-C hose assembly

France

Aircraft refuelling hoses

TW-E, HD-C Neon, PHD-F, HD-C

DAC-V 65, DAC-M 65

Coupling test facility

ELAPAC FD 50 Oval flange seal

Dispenser at the airport

ZVA 25 Avgas for overwing refuelling

Ship bunkering with LNG

CBC Cryogenic Breakaway Coupling from MannTek and hose assembly for cryogenic media

ZVA Slimline 2, ZVA Slimline 2 GR (Special type with PowerPerformer)

ELAFLEX Hamburg

Construction

Solvapal 32

Solvent hose to EN 12115 for most solvents, paints (also waterbased), water laquer, petroleum products, alcohols, alede hydes, esters and ketones. In short term operation also suitable for aromatic und chlorinated hydrocarbons.

Elaflex Hamburg

Manufacturing bronze corrugated pipes

VB 100 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

Universal hose assembly UTD 19 with MC 19 SS

LNG ship bunkering

DCC 100 Dry Cryogenic Coupling, CBC 100 PERC Cryogenic Breakaway Coupling

Tank storage: manifold with DDC Dry Disconnect Couplings, TW hose assemblies

ELAFLEX Hamburg

Coax hose assembling

Aircraft refuelling

Carter Underwing Nozzle, HD 63 C Neon, ZVF 50 AVGAS, SC 50 Al, HD 50 C, Hose Bead BD 50