Media Library / Images

ERV-GS

"Yellow Steel" Rubber Expansion Joints / ship engine room of a ferry

Offshore FSRU (Floating Regasification Unit), connector for gasoil sludge / seawater

DDC-V 150 F

Lightweight Gravity Discharge Road Tanker Hose LG 4"

with TW coupling (VK 100)

MK 80-2" IG

TW female coupler, brass, with reduced female thread (special type)

Rail tanker unloading of petroleum based products

FWS PP St/St composite hose, MannTek Dry Disconnect Coupling, KWZ adapter

ZVA Slimline 2 LA nozzle with LeverAssist hold-open aid

LeverAssist reduces the hold-open force by 90%, for comfortable refuelling in countries where latching is not allowed

MK 50 SSE

TW female coupler. Material: stainless steel with universally resistant PFA coating (red)

Unloading petroleum products at the service station (road tanker to UST)

LG 3" hose assembly for gravity discharge, LTW 50 hose assembly for vapour balance

ELAFLEX hose quality: braided reinforcements

serve for flexibility, low weight and increased lifetime

MC 75-3" Ms

Female hose coupling for hoses, brass, with Spannloc clamps

Terminal, TW hose assemblies and DDC Dry Disconnect Couplings

ELAFLEX Hamburg

Main building / entrance

ZVA Slimline 2 GR, Coax hose assembly

UK

MC 75-3" SS

Female hose coupling for hoses, stainless steel, with Spannloc clamps

Camlock hose couplings: system comparison

Easyloc from Elaflex with automatically secured levers.

ERV TA:

ERV with white PTFE lining. Used when the chemical resistance of the chosen ERV type is insufficient. Resistant to all commonly used liquids. Electrically isolating, therefore not suitable for flammable liquids in Ex-Zones. Admissible working temperature of expansion joint has to be observed. For maximum pressure of 6 bar – not suitable for vacuum.

Aircraft refuelling

Carter Underwing Nozzle, HD 63 C Neon, ZVF 50 AVGAS, SC 50 Al, HD 50 C, Hose Bead BD 50

ELAFLEX quality: section view of a ERV bellows

ERV-OR "Orange Band"

ZVF 50 JET overwing refuelling

with HD-C hose assembly

SG 1" 1x0 Al

Sight Glass with propeller, to EN 13617-1, DN 25, for installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised gasoline and diesel fuels according EN 589 + EN 590, including ethanol or biodiesel content, also Avgas and Jet-A1.

ELAPHARM Type EPH-OHM G

electrically conductive 'OHM/T', with light grey cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, black PTFE liner. Clamp fittings, lining flared (free of dead spaces).

ERV-G ... TW

Aircraft refueller

VSR vacuum support ring for ERV Rubber Expansion Joints

to increase vacuum resistance of a chosen ERV type. Open ring of stainless steel 1.4571

L.P.Gas road tanker, Hose Reel with LPG 50, MannTek DGC

DGC-M 50 SS, DGC-K

COAX Safety Break NR

CSB 21 NR

GasGuard LPG nozzle GG30

4-slot design to facilitate connection of the nozzle to the vehicle fill point. New nose piece design to reduce the released gas upon valve closure, incorporating improved gas release method to minimise the risk of splash back.

ELAFLEX HIBY Tanktechnik, Production Plettenberg / Germany

Assembling ZVA

ERV SR:

ERV with inner protection sleeve of stainless steel AISI 316 Ti to prevent abrasion of the rubber liner, i. e. for media containing abrasive components or to avoid cavitation. Please note : The nominal bore is reduced.

DN 1" Ms

Double nipple brass

AKD-Hy

Coupling seal type AKD for cam locking couplings EN 14420-7. Here: of CSM