Media Library / Images

Oasis BV708, 1" ball valve / isolation valve, CNG fill post for trailer loading with HC200 Quick Coupler

Offset UST filling point, LTW hose assemblies with TW couplings

Operator

KSS-SD of stainless steel

for saturated steam hoses. These hose assemblies are subject to high wear. The main stress area for hose assemblies is also at the joint end is protected.

Elapharm EPH 38 OHM-G with CF hose tail DIN 32676, free of dead spaces

ZVA Slimline 2 LT & ZVA Slimline 2 GR LT nozzles

Use of special seals for cold regions

Offshore FSRU (Floating Regasification Unit), connector for gasoil sludge / seawater

DDC-V 150 F

LPG Autogas Adapter (filler inlet) BAYO

Bayonet connection

Elaflon PTFE 50

Universal hose with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals. Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° up to + 150° Celsius (depending on medium). Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min. Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

UTS hose assembly with AMKC 32 SS and AVKC 32 SS

'Camlock' stainless steel female and male coupling to EN 14420 - 7 with hose tail and Spannloc clamps

ZVA Slimline 2

with blue product sleeve and guard no. 3

L.P. Gas rail tanker

loading and unloading with DGC Dry Gas Couplings, LPG hose assemblies. Vehicle side: DGC-V male couplings with flange

Solvent filling with integrated vapour recovery in the nozzle

ZVA 25 GR, UTS hose assemblies

M 21-1" cr

Female ferrule hose coupling EN 14424, reuasable. Slimline 21 hose, red.

Type PCS, Polypal Clean

one side with RMC foodstuff fitting / Spannloc clamps stainless steel, other side open (note the inner conductive stripe)

SPANNLOC bolted safety clamps of stainless steel

SC 75 SS

UTS 50 hose assembly

with MannTek DDC Dry Disconnect Coupling; use eg. as road tanker hose for filling AdBlue petrol station tanks

Composite hose Danoil 7GG, DDC-M Dry Disconnect Coupling, airport depot

Adapter: MK 50-45° SS x VK 50 SS

The lever is bent to enable lever arrest (safe position when coupled)

Large reel, HD hose assembly, ZH 50 nozzle

CBC-C

Cryogenic Breakaway Coupling for LNG with cable release: before release

LNG ship bunkering

DCC Dry Cryogenic Coupling, CBC-PERC Cryogenic Breakaway Coupling

DCC Dry Cryogenic Coupling for LNG

Coupling process

Fuel delivery at the petrol station

LTW 75 fuel delivery hose, MKX 80 female TW coupler

Oasis SV104 Sandwich Valve with Air Torque Actuator, for CNG

SG 1½" Al

Ssight glass for ZVA 32 nozzles, e.g. for aviation refuelling.

Filling of Heating Oil Tanks: Adapter KR 50-2 3/4" (Switzerland)

for difficult to reach filler inlets

DAC-V 65, DAC-M 65

Aircraft refueller , Dry Aircraft Coupling to ISO 45 for bottom loading - with and without sight glass

Forklift refuelling with LPG (L.P. Gas, Autogas)

GasGuard nozzle, LPG 16 hose; dispenser

LNG Refuelling

Venting the tank with Vent Coupling 'VC-LNG'

TSVX 50

Hose connectors with double shank of hot stamped brass, with Spannfix safety clamps of hot stamped aluminium.