Media Library / Images

Oasis FV103 45° Fill Valve with NC 203 P30 Nozzle, for CNG

ELAFLEX Hamburg, stock bellows

Oasis TM106 Trailer Unloading Manifold, for CNG

UTS hose assembly with AMKC 25 SS/SS

'Camlock' stainless steel coupler to EN 14420 - 7 with hose tail and Spannloc stainless steel clamps

Anti-Kinking Spiral 'KSS'

The main bending stress area for hose assemblies is directly behind the coupling. To reinforce this area we developed the new Anti-Kinking Spiral 'KSS': suitable for all ELAFLEX hoses, recommended for dynamically strong stressed universal hoses with thermoplastic linings

HD-C LT, Low Temperature

LT (Low Temperature) types of our aircraft refuelling hoses are suitable for use in especially cold regions - high flexibility.

ERV-GR 250.10 SS TA

Green Band Rubber Expansion Joint with PTFE lining

ELAFLEX Hamburg

Certificate pressure test

ZV 500 nozzle for heating oil, hose assembly

ERV-R 200x175.16 ZS 4

Red Band Rubber Expansion Joint, special length 175 mm, with "ZS" limiter (tie rods with outer limitation in rubber bushings)

Storz Safety Coupling SHK

upon uncoupling, the safety dust plug first falls into holding claws, relasing an eventual pressure within the system. Only then the dust cap can be fully taken off. - increased protection for the operating personnel. Easy to use, no additional pressure release necessary, slim design, does not build up, no freezing up in the dome section.

PSB Pump Safety Break for High Hose Dispensers

Picture shows separation of the Slimline hose assembly after a drive-off accident

ERV with FSH:

Flame protection cover (closed)

Hose assemblies for petroleum based procucts

LTW 75, VX 80-3, MannTek DDC-M80-3Ms & TW 63, SFX 63 TW

Elaflon PTFE 25

ZVA Slimline 2 / ZVA Slimline 2 GR

Petrol station nozzles with and without vapour recovery, hose assemblies

SFC 38 SSE

Swiveling flange hose coupling with Spannfix clamps. Material: stainless steel with universally resistant PFA coating (red)

FWS composite hoses / hose assemblies

Type FWS PTFE with male threaded fitting, Type FWS PP with Camlock coupling, Type FWS VR with "TW" female coupler MK

Stainless steel Hose Reel spring rewind black, FEP 38, DDC-M 50 SS

L.P.Gas home delivery:

LPG 38 hose assembly - Aboveground storage Tank

DEC – Dry Evotek Couplings:

dry disconnect couplings for the chemical industry.
• Low connecting forces even against pressure
• Ergonomic handle (DN40 and bigger)
• Good transmission ratio in the cam curve
• Wide range of chemical resistance due to selection of high quality materials
• Minimized spillage during decoupling

ZVA Slimline 2, black, guard 3 - side/front view

ZVF 50 UL91 overwing refuelling

UL 91: new unleaded aviation fuel - identification colour green

ELAFLEX Hamburg

ERV marking after test

ELAFLEX Hamburg

Assembling cell dispensing hoses

Slimline 16 yellow

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360.

M 21-1" cr

Female ferrule hose coupling EN 14424, reuasable. Slimline 21 hose, blue.

ERV Rubber Expansion Joints

Picture 4

Elapharm clamp fittings

AMB 50 SS

'Camlock' stainless steel dust cap to EN 14420 - 7 for male adapters AVK with captive seal