Media Library / Images

Storz Safety Couplings Type SHK

upon uncoupling, the safety dust plug first falls into holding claws, relasing an eventual pressure within the system. Only then the dust cap can be fully taken off. - increased protection for the operating personnel. Easy to use, no additional pressure release necessary, slim design, does not build up, no freezing up in the dome section.

KR 50 - 21/2"

Filling of Heating Oil Tanks: New Adapter for difficult-to-reach house connectors

Section view of a DRIP STOP spout

for ZVA Slimline 2 nozzles - stops dripping Diesel

DCC Dry Cryogenic Coupling for LNG

Coupling process

Ship bunkering with LNG

towards the end of the bunkering process

DN 1" Ms

Double nipple brass

LMD 25 Blue Band solvent hose

without helix

Road tanker hose reel, made by Elaflex Italia

with LPG hose assembly

Slimline 21 red

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360 and EN 13483.

ERV-D

Rubber Expansion Joints Type ERV-D DN 200 - 4200, single or multi-sphere bellows. Here: DN 3600

Heating oil delivery: ZV 500 nozzle, HD reel hose - up to 80 mtr length

Ferrule threaded hose coupling M 19-1" Ms

for petrol station dispensing hoses

ZVA Slimline 2 TMV nozzle for Diesel with DRIP STOP spout

ZVA HV for AdBlue®, SSB 16 SS, SL 16 for AdBlue®, Elafix 40

Urea solution (DEF, ARLA 32) for trucks: nozzle, Safety Break, hose assembly and adapter for the vehicle AdBlue^® filler inlet to avoid misfuellings.

DDC-M 80 SS; SG 3", VC 75-3, Elaflon FEP 75, DDC-K 3" SS ADR

Epoxy resin loading with Dry Disconnect Coupling, sight glass and FEP universal hose. DDC cap with pressure relief at container tank outlet.

ROTEX 80.16 ZS 2

Tied Flanges – Type ZS, Tie rods with outer limitation in rubber bushings

Adapter coupling DGC / ACME

DGC-V 50 x 1 3/4" ACME. Dry Disconnect Couplings are state of the art for the fast and safe loading/unloading for liquefied gas (LPG). Connecting with standard fittings is still possible with adapters, like this one with ACME thread.

Elaflon PTFE

Universal hose with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals. Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° up to + 150° Celsius (depending on medium). Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min. Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

ZVA 25 with Z-Swivel

Boat Refuelling, Hose Reel

ELAFLEX Hamburg

Hose assemblies, testing electrical conductivity

Lube Flow Modul for IBC loading/unloading

FWS 50 PP, DDC-M 50, HD 50, ZV 400, ERV-G 50 Special Type

Fixed Flange and hose tail of stailess steel

SFC 63.16 SS

BD 63 Hose Beads

to EI 1522 standard - notably improve handling as they reduce friction against the tarmac. They additionally protect against hose abrasion. 'BD' Hose Beads are highly break resistant, contain no bolts or nuts, can be easily assembled or disassembled and are suitable for reeling.

MK 50 SSE

TW female coupler stainless steel, with PFA coating (red)

For long and heavy aviation refuelling hoses: Hose Beads 'BD' to EI 1522 standard

They notably improve handling as they reduce friction against the tarmac. They additionally protect against hose abrasion. 'BD' Hose Beads are highly break resistant, contain no bolts or nuts, can be easily assembled or disassembled and are suitable for reeling.

Camlock cam locking couplings

top left – ELAFLEX standard version; bottom right – ELAFLEX EASYLOC version

Camlock Cam Locking Coupling AMK 50 Ms (brass)

LPG road tanker loading with MannTek DGC Dry Gas Couplings

Rubber Expansion Joint ERV-CR 80.16

CR Expansion Joints for cold and warm water, swimming pool water, sea water, waste water (weakly sour or alkaline) also oil containing, cooling water with protective oils against corrosion, lubricating oil, grease and air, compressed air. Temperature range (depending on medium) - 25° C up to + 90° C, temporarily up to + 100° C. Electrically non-conductive.

Unloading petroleum products at the service station (road tanker to UST)

MK 80-32° coupling with bent lever. For any application it should be checked that the lever can be arrested as shown even if there is tight space. Elaflex offers bent levers for all MK couplers.