Media Library / Images

TWD-TM coupling seal

PTFE encapsulated

Ship bunkering with LNG

Coupling of DCC male and female part DN 50; left hand side CBC 50 Cryogenic Breakaway Coupling

Fuel Grade Identification to EN 16942 for ZVA Nozzles

Type EK FGI - attach with Product Badge EK 145

DEC – Dry Evotek Coupling

Dry disconnect coupling for the chemical industry

Equipment for vehicles fighting dangerous goods incidents:

PTFE 50 Universal hose assemblies - with TW couplings of stainless steel

ZVA Slimline 2 for aircraft refuelling

black plastic cover (scuffguard), Sight Glass, dust cap and ground cable assembly

Section view ERV-G Rubber Expansion Joint

Bunker boat: TW hose assemblies, TW couplings

Slimline 21 yellow

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360 and EN 13483.

ERV-GR ... ZS

"Green Band" Rubber Expansion Joints with limiters in chemical pumping system

Elaflon Plus FEP 50

Offshore oilrig: TW hose assemblies, DDC Dry Disconnect Couplings

ELAPHARM Type EPH 25

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

Slimline SF 19 black

Quality petrol pump hose for gasoline and diesel fuels. Special type 'sulphur-free'. Sulphur content of fuel does not increase, even if medium remains with the hose for a longer time, see Information 12. 15 and catalogue page 111c.

Cargo loading of a tanker with petroleum based products; FHD hose assembly

Picture courtesy of Macoil International, Gibraltar

Forklift refuelling with LPG (L.P. Gas, Autogas)

GasGuard nozzle, LPG 16 hose

Boat refuelling, ZVA 25

VB 80 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

ERV-R 200x175.16 ZS 4

Red Band Rubber Expansion Joint, special length 175 mm, with "ZS" limiter (tie rods with outer limitation in rubber bushings)

H2 Hydrogen

H2 25 D Hydrogen hose, SFC 25, MX 25, VC 25

Underwing refuelling, HD-C

Aircraft dispenser, pit

ERV-R 100.16

RED BAND Rubber Expansion Joint for water, drinking water (DVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature range - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

GasGuard LPG / Autogas refuelling equipment

Nozzles, nozzle boot for dispenser installation, LPG 16 hose assemblies, Safety Break ARK 19

Tank storage: manifold with DDC Dry Disconnect Couplings, TW hose assemblies

ZVA Slimline 2

with Sight Glass

Connection road tanker to trailer: LTW hose assembly, DDC Dry Disconnect Coupling

DN 1" Ms

Double nipple brass

RS 2 x 3 SS

Reducer Female/Male

Oasis FV103 90° Fill Valve with Bus & Truck Nozzle, for CNG

Elaflex hoses

HD, TW, LPG, FXD, SL, FEP, CHS, LMS, UTS, PTFE, PCS