Media Library / Images

DN 1" Ms

Double nipple brass

RN 2 x 21/2" SS

Reducing nipple

Type PCS 50 (Polypal Clean DN 50 mm)

oasis TH104 Tank Head Valves, CNG trailer

Hot stamping process, production TW coupling parts

VB 50 SS

TW dust plug, stainless steel

AMX 50 PA

Ammoniac hose to EN ISO 5771 for water-free, liquid and gaseous ammonia.

Cabinet of road tanker:

MK 80-32 TW coupler with bent lever, VB 80 P dust plug

Hose assemblies for petroleum based procucts

LTW 75, VX 80-3, MannTek DDC-M80-3Ms & TW 63, SFX 63 TW

ELAFLEX Hamburg, narrow aisle stock for small parts – picture 2

Adapters / couplers for vehicles fighting dangerous goods incidents:

Adapter Rail Tanker Dischharge Coupling KWK SS/Vi x VK 50 SS/Vi

Offshore oilrig: TW hose assemblies, DDC Dry Disconnect Couplings

MKC 75.80 SS

TW female two-part coupler, stainless steel

ERV-G

Ship engine room: 2 Yellow Band Expansion Joints mounted together for extra permissable movement

Pharma hose fittings

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

Elaflon PTFE hose asemblies

Road tanker for heating oil delivery, HD hose assembly, ZV 500 nozzle, MK 80 Ms coupler with VB 80 P dust plug

ELAFLEX Hamburg

Incoming goods / flanges

Adapter: VK 100 x MK 80-32°

The lever is bent to enable lever arrest (safe position when coupled)

ZVA HV for AdBlue®, SSB 16 SS, SL 16 for AdBlue®, Elafix 40

Urea solution (DEF, ARLA 32) for trucks: nozzle, Safety Break, hose assembly and adapter for the vehicle AdBlue^® filler inlet to avoid misfuellings.

ROTEX 80.16

Rubber Expansion Joint suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative

Manifold, Ultra Fast Fill Quick Coupler 350 bar

for Hydrogen

ELAFLEX Hamburg

Hose assemblies, marking after testing on the fitting

Adapter: MK 80-32° Ms x MK 80-32° Ms

Special type with bent levers. The lever is bent to enable lever arrest (safe position when coupled)

Rubber Expansion Joint ERV-R 80.16

RED BAND expansion joints for water, drinking water (approvalDVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature (depending on medium) - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

HD 32 C

Yellow Band' aircraft refuelling hose, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range - 30° up to + 90° Celsius. Electrical resistance between 1,000 and 1 million Ohm.

Rail tanker discharge coupling KWK, with elbow DN 80

for damaged / dirty rail tanker or other threaded hose connections. Used e.g. for environmental protection trucks

Elapharm EPH 25

ELAPHARM electrically isolating ' I ', blue cover. Corresponds to DIN 26055-3 / EN 16820, Type A. FDA conform. Homogeneous elastomer hose construction with smooth, white Teflon® PTFE liner.

ZVA Slimline 2, guard no. 4, Sight Glass SG 1 Al, Slimline hose assembly