Media Library / Images

MannTek DDC-V & DDC-M Dry Disconnect Couplings

VX 63 2½" SS NR Al

Hose coupling with male thread, Spannloc aus Aluminium

VX 38-11/2" SS

Spannfix male hose coupling, stainless steel

Functioning principle of MannTek DDC Dry Disconnect Couplings

closed - open

ZVA Slimline 2 / ZVA Slimline 2 GR

Petrol station nozzles with (top) and without vapour recovery (below)

ZVF 50 JET

Manual aviation fuelling nozzle for overwing service. Flowrate up to 400 ltr. / min. (85 IGM – higher flowrates are possible). Size DN 50. Working pressure PN 10 (140 psi). Temperature range - 40° C up to + 55° C.

ZVF 25 with EKG and GKG

Manual nozzle DN 25 for aircraft overwing refuelling, with ground cable assembly, dust cap assembly and AVGAS sticker (decal)

ZV 19.1

ZV 19 manually operated dispensing nozzle, DN 19 (3/4"), for diesel, fuel, petroleum and oils (also vegetable oils) up to 100 ltr./min.

ERV RG:

Angular limiter

MKX 80 Ms, coupling hose assembly

ZVA Slimline 2 GRVP, Coax hose assembly

With integrated vapour insert EK 096. For dispensers with single fi lling point or dispensers with integrated 'On / Off ' valve. The vapour return rate is regulated within the dispenser.

UTS hose assembly with AMKC 25 SS/SS

'Camlock' stainless steel coupler to EN 14420 - 7 with hose tail and Spannloc stainless steel clamps

Rubber Expansion Joint ERV-W 80.16

WHITE BAND expansion joints for foodstuffs, also containing oil and fat. Liner corresponds to Recommendation XXI of BfR and FDA-21CFR 177.2600. Not approved for drinking water. Temperature range (depending on medium) - 20° C up to + 90° C, temporarily up to 100° C. Electrically non-conductive.

UTL 50 universal hose with MannTek Dry Disconnect Coupling

Slimline 21 yellow

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360 and EN 13483.

ERV ZSS:

Tied Flanges – Tie rods with inner and outer limitation

ERV-G Yellow Band rubber expansion joint, wind turbine (hydraulic oil)

For long and heavy aviation refuelling hoses: Hose Beads 'BD' to EI 1522 standard

They notably improve handling as they reduce friction against the tarmac. They additionally protect against hose abrasion. 'BD' Hose Beads are highly break resistant, contain no bolts or nuts, can be easily assembled or disassembled and are suitable for reeling.

Hose Reels group picture

Movable, pneumatic rewind system, active Vapour Recovery (VR) for gasoline fuels

V 63 2½" SS

Hose coupling with male thread

ERV-ROTEX expansion joint, hot water pumping system

AMX 50 PA

Ammoniac hose to EN ISO 5771 for water-free, liquid and gaseous ammonia.

LNG bunkering

Transfer system

Tank truck and trailer with HD 45 hose reel, ZV 500 nozzle

GasGuard LPG nozzle GG30

4-slot design to facilitate connection of the nozzle to the vehicle fill point. New nose piece design to reduce the released gas upon valve closure, incorporating improved gas release method to minimise the risk of splash back.

SPANNLOC bolted safety clamps of stainless steel

SC 75 SS

MB 100 Al

Dust cap for VK 100, aluminium

Universal hose assembly for vehicles fighting dangerous goods incidents:

Aspiration hose PTFE 32 length 2,1 mtr., one side VKC 32.50 SS/Vi SS, other side open

GSD 50 PU

Coupling seal for TW couplings, polyurethane

Safety Swivel Break

SSB 32