Media Library / Images

Oasis FV103 45° Fill Valve, for CNG

ERV-G Yellow Band rubber expansion joint, wind turbine (hydraulic oil)

Universal hose UTS 50

MB 80 SSE

TW dust cap of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

PAL hoses for the chemical industry

SFC 50.16

hose flange; hose tail and swiveling flange of steel, Spannloc clams

Tank storage, mixer: LTW hose assemblies

Oasis FV103 with NC203 P36, Light Duty Fill Valve and Transit Nozzle for CNG

HD-C NEON hose with new, REFLECTING marking

Lube oil loading of a ship

TW 75 hose assembly, TW couplings

ELAFLEX Hamburg

Construction site / on site refuelling:

ZVA 25 (automatic nozzle), road tanker

Universal hose assembly

PCS 75 (Polypal Clean DN 75 mm) with MX 75-3" SS and DDC-M 80-3" SS Dry Disconnect Coupling

Fluorflex FXD 50

PTFE / EPDM Universal helical hose - high performance chemical hose to DIN 26054, combining the universal chemical resistance of PTFE with exceptional flexibility and tight bending radius.

Elaflon Plus FEP 50

VX 38-11/2" SS

Spannfix male hose coupling, stainless steel

ERV-R 100.16

RED BAND Rubber Expansion Joint for water, drinking water (DVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature range - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

ELAPHARM and SD Pyropal steam hose

Pharmaceutical production

ERV-G ... TW

Aircraft refueller

GasGuard LPG nozzle GG30

4-slot design to facilitate connection of the nozzle to the vehicle fill point. New nose piece design to reduce the released gas upon valve closure, incorporating improved gas release method to minimise the risk of splash back.

ZV 500, hand

High performance manual operated dispensing nozzle with 'TW' coupling MK 50 for Diesel, fuel, oils, petroleum

ZVF 50 JET

Manual aviation fuelling nozzle for overwing service. Flowrate up to 400 ltr. / min. (85 IGM – higher flowrates are possible). Size DN 50. Working pressure 10 bar (140 psi). Temperature range -40° C up to +55° C

MK 80 SS, TW couplers stainless steel

ERV-R

"Red Band" Rubber Expansion Joints / ship engine room

HD 100 C, HD 10 sensing hose

Aircraft Dispenser with DN 100 hose (spiralised marking) and a sensor hose to control the hydrant system.

ZVA 25 GR

For the filling of small containers and IBC with solvents. With vapour recovery.

Adapters / couplers for vehicles fighting dangerous goods incidents:

Adapter Hebelarmkupplungen AVK 50 SS/Vi x VK 50 SS/Vi, AMK 50 SS/Vi x VK 50 SS/Vi, AVK 75 SS/Vi x VK 50 SS/Vi

Slimline 16 green

Quality dispensing hose for the forecourt

VK 80 - 2" IG Ms

TW male coupling brass, with reduced female BSP connection, one piece adapter (special type)

Road tanker Sweden

large reel with HD hose assembly, DDC-V (Dry Disconnect Coupling, tank unit) and DDC-K (caps)