Media Library / Images

HD 100 C NEON, HD 10 C sensing hose

Type HD-C, aviation hose

M 16-1" NR cr

Female ferrule hose coupling EN 14424, factory assembled, non-reattacheable. Slimline 16 hose, blue.

ELAFLEX Hamburg

ZVA 25

HIFLO-Automatic nozzle DN 25 (1"), flowrate up to 140 litres/min.

Hose assemblies

for dangerous goods: ELAFLEX quality

Connection road tanker to trailer: LTW hose assembly, DDC Dry Disconnect Coupling

VB 80 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

ELAFLEX Hamburg

ERV pressure testing

CBC-C

Cryogenic Breakaway Coupling for LNG with cable release: before release

DDC-V 25 Al; DDC-K 25

Dry Disconnect Coupling as probe/sampling unit connection at aircraft refueller

KR 50 - 21/2", HD reel hose

Filling of Heating Oil Tanks: New Adapter for difficult-to-reach house connectors

Hot stamping process, production TW coupling parts

DEC – Dry Evotek Couplings:

dry disconnect couplings for the chemical industry.
• Low connecting forces even against pressure
• Ergonomic handle (DN40 and bigger)
• Good transmission ratio in the cam curve
• Wide range of chemical resistance due to selection of high quality materials
• Minimized spillage during decoupling

Elaflon PTFE

Universal hose with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals. Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° up to + 150° Celsius (depending on medium). Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min. Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

Universal hose UTL 50

TW coupler MK 80 SS-90° (bent lever) and dust plug VB 80 ADR SS with pressure relief

AVKI 38 SSE

Camlock male adapter. Material: stainless steel with universally resistant PFA coating (red)

Railtanker

MannTek DDC-V 80 F Dry Disconnect Couplings (tank unit with flange), Pressure Caps PN 25 with pressure relief

ERV-G 150.TW, ERV-G 80.TW

Aircraft refueller

ZVA Slimline 2 DSA, Prepay Dispenser

DSA: Pressure Controlled Safety Shut-Off

Dantec Production hose

Composite hoses: crimping of a flanged hose coupling

Elaflon Plus FEP 25

Universal hose ELAFLON PLUS FEP with seamless FEP lining, resistant to all commonly used chemicals, see resistance chart. Suitable for both suction and delivery (Type FEP D = delivery only). W.P. up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° C up to + 100° C, briefly up to 130° C. Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min (open system). Meets EN 12115.

UTL 50 universal chemical hose assembly and TW female coupler MKC 50 SS

LNG Refuelling

LNG Nozzle 'N-LNG' coupled to fuel, LNG 25 fill hose assembly, vent hose assenbly with 'VC-LNG'

ZVA Slimline 2 LA nozzle with LeverAssist hold-open aid

Slimline 21 hose assembly with non reattacheable female coupling M 21-1" NR

ZV 500

High performance manual operated dispensing nozzle with 'TW' coupling MK 50 for Diesel, fuel, oils, petroleum

Manifold for incoming media, chemical industry

Elaflon PTFE universal hose, AMK 50 EASY (Easyloc cam locking couplings with automatic lever lock)

ZVG 2 ACME nozzle for L.P. Gas / Autogas, LPG 16 hose assembly

ZVA 25 for aircraft refuelling

red plastic cover (scuffguard), decal (sticker) AVGAS, dust cap and ground cable assembly