Media Library / Images

Camlock couplings:

stainless steel female and male couplings to EN 14420 - 7

Terminal / gantry: 'Polypal Oil 100' and 'TW 100' hose assemblies for bottom loading of road tankers

Slimline quality dispensing hose for the forecourt

SL 21 black

Hose Safety Break for LPG

ARK 19

Oasis ball valves for CNG

Solvapal hose assemblies

Solvents

Cargo loading of a tanker with petroleum based products; FHD hose assembly with new longitudinal stripe to avoid torsion

Picture courtesy of Macoil International, Gibraltar

Rubber Expansion Joint ERV-GS HNBR 80.16

YELLOW STEEL HNBR expansion joints for petroleum based products, DIN EN fuels up to 50 % aromatic content, cooling water with oily anticorrosion additives, lubrication and hydraulic oil, seawater. Very good aging, weathering and ozone resistance. Temperature range (depending on medium) - 35° C up to + 100° C, temporarily up to + 120° C. Fire resistant to ISO 15540 up 30 min. at + 800° C. Electrically dissipative.

Swivels DG of stainless steel

Swivels serve to avoid hose torsion (increase of life span) and help for easier handling

M-St 50 SSE

Female threaded hose tail for assembling with Spannfix or Spannloc. Material: stainless steel with universally resistant PFA coating (red)

Construction of ELAFLEX composite hoses type FWS

Sectioned view of a composite hose, denomination of the components (English)

M 16-1" NR cr

Female ferrule hose coupling EN 14424, factory assembled, non-reattacheable. Slimline 16 hose, black.

Rubber Expansion Joint ERV-GR 80.16

GREEN BAND expansion joints for chemicals, acids, alkalis and aggressive chemical waste water. For oil-contaminated compressed air up to + 90° C. Temperature range (depending on medium) - 20° C up to + 100° C, temporarily up to + 110° C. Electrically non-conductive.

Rubber Expansion Joint ROTEX 80.16

ROTEX expansion joints suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative.

Oasis SV Sandwich Valves 100series, for CNG

Type PCS 38 (Polypal Clean DN 38 mm)

Universal hose assembly

PCS 75 (Polypal Clean DN 75 mm) with MX 75-3" SS and DDC-M 80-3" SS Dry Disconnect Coupling

ZVA Slimline 2, ZVA Slimline 2 GR (Special type with PowerPerformer)

MK 50 SSE

TW female coupler. Material: stainless steel with universally resistant PFA coating (red)

Oasis FV103 45° Fill Valve with NC 203 P30 Nozzle, for CNG

Vehicle refuelling with LPG (L.P. Gas, Autogas)

ZVG 2 ACME nozzle

Urea solution filling of a car:

ZVA LV for AdBlue^®, Slimline 16 for AdBlue^® (blue cover)

Section view of a DRIP STOP spout

for ZVA Slimline 2 nozzles - stops dripping Diesel

LPG ship-to-ship cargo transfer

Danchem PASS composite hose

Slimline 16 black

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360.

Fire-resistant cover for hoses

Camlock cam locking couplings

top left – ELAFLEX standard version; bottom right – ELAFLEX EASYLOC version

Slimline 21 green

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360 and EN 13483.

Hose assembly for petrol stations

Standard hose SL 16

H2 Hydrogen

ERV-H2+ PN 25, DN 80 und DN 100