Media Library / Images

Rail tanker unloading of petroleum based products

Plant side: FWS PP St/St composite hoses, SG 3" Sight Glasses

ZVG 2 DISH

Nozzle for L.P. Gas / Autogas, with 'Italian' Claw Coupling. Pictured: coupling open / closed

Oasis BV706 ball valves with Code 62 flange connection, for CNG

ZVA Slimline 2 LA nozzle with LeverAssist hold-open aid

and Slimline dispensing hose, yellow

Ship bunkering with STW hose assembly and MannTek DDC Dry Disconnect Couplings

Scandinavia

ERV-G 150.TW, ERV-G 80.TW

Aircraft refueller

Underwing refuelling, HD-C hose assembly

Hydrant dispenser

Production MannTek, Sweden

Ship loading various media - STW 150 and UTS 150 hose assemblies

Elapharm EPH 38 OHM-G with CF hose tail DIN 32676, free of dead spaces

ZVA_AdBlue_LV_2-Stufen-Anschlag_Step2_mod

Use - 2/2

Elaflon PTFE 50

Universal hose with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals. Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° up to + 150° Celsius (depending on medium). Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min. Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

VX 38-11/2" SS

Spannfix male hose coupling, stainless steel

Assembling "ZS" tie rods to ERV rubber expansion joints

ZV 19.1

ZV 19 manually operated dispensing nozzle, DN 19 (3/4"), for diesel, fuel, petroleum and oils (also vegetable oils) up to 100 ltr./min.

ERV with black, conductive PTFE lining 'TA OHM'

ERV-G Yellow Band rubber expansion joint, wind turbine (hydraulic oil)

Simultaneous Refuelling/Filling of Diesel and AdBlue®

Picture 1

DN 1" Ms

Double nipple brass

ZVA Slimline 2 for aircraft refuelling

black plastic cover (scuffguard), Sight Glass, dust cap and ground cable assembly

ROTEX 80.16

Rubber Expansion Joint suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative

MKX 80 Ms, coupling hose assembly

ZVA Slimline 2 LA nozzle with LeverAssist hold-open aid

Hose assembly TW 75 with MKX 75.80 Ms

TW hose with TW female coupler, two piece

Road tanker for heating oil delivery, DDC Dry Disconnect coupling with ADR conform cap as trailer connection

Road tanker reel with HD 50 hose assembly, ZV 500 nozzle

M 21-1" NR cr

Female ferrule hose coupling EN 14424, factory assembled, non-reattacheable. Slimline 21 hose, yellow.

GasGuard LPG nozzle GG30

LPGas nozzle with Bayonet connection according to EN 12806 - 2003 for the filling of commercial and passenger Autogas vehicles as well as mobile and small stationary storage tanks with propane and butane. New : 4-slot design to facilitate connection of the nozzle to the vehicle fill point. New nose piece design to reduce the released gas upon valve closure, incorporating improved gas release method to minimise the risk of splash back.

Road tanker connection hose to trailer with bend KR 50, HD 50 hose assembly MX 50-2" Ms

L.P.Gas petrolstation, GG20, Slimline, ZVG 2 EURO UL