Media Library / Images

LNG Refuelling

LNG Nozzle 'N-LNG' coupled to fuel, LNG 25 fill hose assembly

ELAFLEX Hamburg

New narrow aisle stock (2018)

UTS hose assembly

on board of a foodstuff road tanker

Cargo loading of a tanker with petroleum based products; FHD hose assembly

Picture courtesy of Macoil International, Gibraltar

DDC-V Dry Disconnect Couplings for various media

tank storage; TW hose assembly

SG 1" 1x0 Al

Sight Glass with propeller, to EN 13617-1, DN 25, for installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised gasoline and diesel fuels according EN 589 + EN 590, including ethanol or biodiesel content, also Avgas and Jet-A1.

ZVA Slimline 2, guard no. 8D, black scuffguard, red product sleeve, SL 16 hose assembly with red colour sleeve

ERV-GS; ERV-G

Rubber Expansion Joints - use in ship engine room

ZVG 2 K (Korea)

LPG nozzle for vehicle refuelling with liquefied petroleum gas (propane, butane and mixtures) up to 50 l / min. Working pressure 25 bar. Test pressure 40 bar. Burst pressure > 100 bar. Temperature range - 25° up to + 70° C, 'LT'-Type down to - 40° C.

SG-COAX

Sight Glass for ZVA Slimline 2 GR

Slimline SF 19 black

Quality petrol pump hose for gasoline and diesel fuels. Special type 'sulphur-free'. Sulphur content of fuel does not increase, even if medium remains with the hose for a longer time, see Information 12. 15 and catalogue page 111c.

Pipe with AVKI 50 SS, hose assembly with AVKX 50 SS

'Camlock' stainless steel female and male coupling to EN 14420 - 7

Aljac Closed Circuit Sampler (CCS), Carter Underwing Nozzle, bonding reel

Airfield refueller

ERV-OR

"Orange Band" Rubber Expansion Joints for L.P. Gas, depot

HD-C, underwing nozzle

Aircraft refueller, large reel with aircraft refuelling hose and underwing nozzle

DCC Dry Cryogenic Coupling for LNG

Coupling process

ELAFLEX Hamburg

Assembling cell dispensing hoses

Rubber Expansion Joint ERV-BR 80.16

BR Expansion Joints, special type for abrasive media such as sludges, slurries, solid / liquid mixtures and emulsions, dustlike or powdery products (e. g. carbon-blacks). Also suitable for all kinds of water (non oil containing) as well as various chemicals. Not suitable for petroleum based products. For extreme strain (e.g. sharp and rough-edged matter) we suggest the use of ERV with inner protection sleeve type SR

Alternative fuels: DME Dimethyl Ester

DGC Dry Gas Coupling, EFL 16 Fluorline hose assembly

ZVA 32 for aircraft refuelling

black plastic cover (scuffguard), Sight Glass, dust cap and ground cable assembly

ZVG 2 K (Korea)

uncoupling from J 15 filler connection

SPANNLOC bolted safety clamps of stainless steel

SC 75 SS

ELAFLEX Hamburg

Assembling COAX hose SL 21, with inner vapour hose, for vapour recovery Stage II

ERV-BR 100.16

BR Rubber Expansion Joint, special type for abrasive media such as sludges, slurries, solid / liquid mixtures and emulsions, dustlike or powdery products. Also suitable for all kinds of water (non oil containing) as well as various chemicals. Not suitable for petroleum based products. For extreme strain (e. g. sharp and rough-edged matter) we suggest the use of ERV with inner protection sleeve type SR.

Hot stamping process, TW coupling part

Elapharm EPH 38 OHM-G with CF hose tail DIN 32676, free of dead spaces

ELAFLEX seals

Graphic, components of a ZVA Slimline 2 GR nozzle for vapour recovery

ERV ZSS:

Tied Flanges – Tie rods with inner and outer limitation

Polypal Clean hose assembly

Pharmaceutical production