Media Library / Images

Elaflon PTFE 50

Universal hose with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals. Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° up to + 150° Celsius (depending on medium). Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min. Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

Rubber Expansion Joint ERV-R 80.16

RED BAND expansion joints for water, drinking water (approvalDVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature (depending on medium) - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

ELAFLEX HIBY Tanktechnik, Production Plettenberg / Germany

Manufacturing nozzle seat

ELAFLEX Hamburg

ERV flange assembly medium sizes

BD 63 Hose Beads

to EI 1522 standard - notably improve handling as they reduce friction against the tarmac. They additionally protect against hose abrasion. 'BD' Hose Beads are highly break resistant, contain no bolts or nuts, can be easily assembled or disassembled and are suitable for reeling.

ELAFLEX refuelling equipment for LPG (Autogas, L.P.Gas)

FFC 50.16 SS

Fixed flange hose fitting of stainless steel, with Spannloc clamps

Ship bunkering with LNG

DCC Dry Cryogenic Coupling CBC Cryogenic Breakaway Coupling

Rail tanker unloading of petroleum based products

Plant side: FWS PP St/St composite hoses, SG 3" Sight Glasses

Fluorflex FXD 50

PTFE / EPDM Universal helical hose - high performance chemical hose to DIN 26054, combining the universal chemical resistance of PTFE with exceptional flexibility and tight bending radius.

AVB 50 SS

'Camlock' stainless steel dust plug to EN 14420 - 7 for female couplers AMK

Customer protected special design ZVA Slimline 2 GR nozzle

MC 75-3" SS

Female hose coupling for hoses, stainless steel, with Spannloc clamps

ERV VSRV:

ERV with bolted vacuum support ring. For maximal vacuum resistance of the selected ERV. Bolted ring in stainless steel AISI 316 Ti.

HD-C, airport depot

Underwing couplings with HD-C hoses for bottom loading of aircraft refuellers at airport depot

LH2 Refuelling

'N-LH2' nozzle for LH2 truck refuelling of cryogenic hydrogen

VB 80 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

DDC-K ADR:

DDC Dust Caps with Pressure Relief Valve to ADR Requirements. These pressurized dust caps PN 10 of aluminium for DDC male adapters on road tankers are much lighter than the PN 25 versions of stainless steel.

ELAPHARM Type EPH 25

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

ZVG 2 ACME nozzle for L.P. Gas / Autogas

visible: Magnet within the guard for the dispenser Reed Switch

Oasis Engineering Ltd, New Zealand (CNG refuelling products)

Oasis Engineering Ltd, New Zealand (CNG refuelling products)

Production Picture 22

FHD 50 special type HIFR

(helicopter in flight refuelling)

Elaflon Plus FEP hose assemblies, SBC Safety Breakaway Couplings

LNG ship bunkering

DCC 100 Dry Cryogenic Coupling, CBC 100 PERC Cryogenic Breakaway Coupling

Underwing refuelling, HD-C

Aircraft dispenser, pit

IBC Adapter RS S60x2 SS

Filling of chemicals with nozzles

UTS hose assemblies, ZVA TD nozzles special type for chemicals

Premium refuelling equipment from ELAFLEX

ERV-BR 300

for abrasive Media