Media Library / Images

IBC unloading

Coupling of chemical hose assembly with AMKC 50 SS (Camlock female with Spannloc attachment) to AMKI male coupling. Use of IBC-reducer RS 60 x 2 SS, directly attached to IBC.

Forklift refuelling with LPG (L.P. Gas, Autogas)

GasGuard nozzle, LPG 16 hose

MannTek, DDC-M 50, DEC-M 38, DDC-M 80, DCC-M 50, DGC-M 80, DAC-M 65, DAC-V 65

VB 80 ADR SS with pressure relief

Plug for MK 80
• Meets the ADR requirements
• Enhanced safety and protects the environment
• Easy, user friendly operation

GasGuard LPG nozzles

and LPG 16 orange hose assemblies for the filling of commercial and passenger Autogas vehicles as well as mobile and small stationary storage tanks with propane and butane.

Oasis BV706 ball valves with Code 62 flange connection, for CNG

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

Unloading petroleum products at the service station (road tanker to UST)

LG 3" hose assembly for gravity discharge, LTW 50 hose assembly for vapour balance

Unloading chemical road tanker

UTS hose assembly

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

H2 Hydrogen

H2 25 D Hydrogen hose

V 16-1" cr

Male ferrule hose coupling EN 14424, reusable. Slimline 16 hose, blue.

Rubber Expansion Joint ERV-GS HNBR 80.16

YELLOW STEEL HNBR expansion joints for petroleum based products, DIN EN fuels up to 50 % aromatic content, cooling water with oily anticorrosion additives, lubrication and hydraulic oil, seawater. Very good aging, weathering and ozone resistance. Temperature range (depending on medium) - 35° C up to + 100° C, temporarily up to + 120° C. Fire resistant to ISO 15540 up 30 min. at + 800° C. Electrically dissipative.

Lightweight Gravity Discharge Road Tanker Hose LG 4"

with TW couplings

ELAFLEX Hamburg

Stock special flanges, pick by voice

IBC metal container; UTS hose assembly

ELAFLEX Hamburg

Nozzle stock, ZVA Slimline 2 GR

SPANNLOC bolted Sicherheits Klemmbacken aus aluminium

SC 75 Al

Swivel EA 075 A f. ZVA HV for AdBlue®

old design

Oasis FV103 45° Fill Valve with NC 203 P36 Nozzle, for CNG

ERV Rubber Expansion Joints

Picture 3

Rail tanker toploading, TW 100 hose assemblies

ELAFLEX Hamburg, narrow aisle stock for small parts

Slimline 19 black

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360.

ZVA Slimline 2, dispenser

Estonia

CBC-C

Cryogenic Breakaway Coupling for LNG with cable release: before release

ERV VSD:

ERV with vacuum support spiral. Spiral of AISI 316 Ti, used when the vacuum resistance of the chosen ERV is not sufficient.

AN 2 SS

Welding nipple stainless steel

Road tanker connection - MK 50 Ms, VB 50 Ms, Chain

Anti theft protection with padlock

Stainless steel couplings with PFA coating, type "...SSE"

Surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.